ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf Keene 2'' Dredge Power Jet Version Keene Artikelnummer: 2004PJF PRODUCT DETAILS This super high powered backpackable dredge is equipped with a quiet, lightweight, heavy-duty Honda GX50 engine. This highly efficient engine can run up to five hours on a single gallon of gas. This engine and pump combination produces an unbelievable 100 gallons per minute and up to 160 feet of head pressure. The 10 by 36 inch sluice box is specifically engineered for fine gold recovery and easy clean up. The Model 2004 is constructed with an aluminum frame and is supported with grey hard cross-linked polyethylene pontoons. The power jet is ideal for most conditions and provides greater suction power and far less rock jams. Includes 15 feet of suction hose and 4 feet of pressure hose. Dredge capacity 1.5 yards per hour. Net weight 65 pounds. Shipping weight 80 pounds. For extremely shallow water conditions, a suction nozzle is recommended. Note: In order to equip this dredge with a suction nozzle, you will need to purchase the following: 1. SN2 Suction Nozzle 2. 17 feet of 1.25 Pressure Hose PH125 3. 2 PHC125F Pressure Hose Couplings 4. 2 Stainless Steel Clamps SS16 5. 1 PJFAQC 2 inch Jet Flair Quick Coupler Adapter

ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf. Video: https://www.youtube.com/watch?v=PLHyXP3IorQ&feature=emb_logo​ Keene 2'' Dredge Doppelsystem Power Jet / Suction Nozzle Keene Artikelnummer:  2004SNPJLK This is a new 2" dredge model that is equipped with both a suction nozzle and a power jet plus, it incorporates our unique design, leg kit. This new dredge is by far, the most versatile dredge we have ever built. This can be floated and pulled around on the floats and now equipped with the new leg kit for a quick and easy bank mounting. Now it only takes a few moments to switch the dredge from a suction nozzle to a power jet and back again. Having the ability to bank mount the dredge with the new leg system is a game changer.

ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf.    Keene 2'' Dredge Power Jet Version Keene Artikelnummer: 2004SNF PRODUCT DETAILS This super high powered backpackable dredge is equipped with a quiet, lightweight, heavy-duty Honda GX50 engine. This highly efficient engine can run up to five hours on a single gallon of gas. This engine and pump combination produces an unbelievable 100 gallons per minute and up to 160 feet of head pressure. The 10 by 36 inch sluice box is specifically engineered for fine gold recovery and easy clean up. The Model 2004 is constructed with an aluminum frame and is supported with either flexible black vinyl inflatable or grey hard cross-linked polyethylene pontoons. Inflatable pontoons are ideal for easy storage and transportation while the cross-linked polyethylene floats are exceptionally durable and light. The suction nozzle is ideal for working in shallow conditions. Includes 15 feet of suction hose and 17 feet of pressure hose. Dredge capacity 1.5 yards per hour. Net weight 66 pounds. Shipping weight 90 pounds. For extremely shallow water conditions, a suction nozzle is recommended. Note: In order to equip this dredge with a power jet, you will need to purchase the following: 1. PJ2O Power Jet 2. 4 feet of 1.25 HD Pressure Hose 3. 1 PHC125F Pressure Hose Couplings 4. 2 each SS16 Stainless Steel Clamps 5. 1 PJFAQC 2 inch Jet Flair Quick Coupler Adapter 6. 1 ST2 2 inch Suction Hose Dredging Tip  

ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf.   Video https://youtu.be/eEAb3jEYMjc Keene A52S Highbanker / Dredge Combo Keene Artikelnummer:  A52SCHDA   PRODUCT DETAILS This all in one package includes everything you will ever need for Sluicing, High banking and dredging. You will get a complete A52S Super sluice box, high banker with deluxe hopper, extention with screen and rubber flaps, our powerful P90gh motor, pump and a 2” dredge set up. This is by far the most versatile package in the world! The one product that will suite all your needs. Includes: - A complete A52S Sluice box - P90GH motor - pump and hoses - higher banker - blaster splitter - 2” dredge assembly

ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf.   The new Proline 2" dredge has redefined the role of the small dredge. Our latest developments have resulted in a smaller, and more portable dredge, with increased suction power and features normally found only on larger dredges. This dredge is now powered by our all new HP 100 pump, direct coupled to the new Honda 2.5 horse power 4-cycle engine. This combination is incredibly powerful, capable of producing well over 100 gallons per minute and twice the pressure of our previous pump. The Honda is extremely quiet and smooth running, with nearly twice the fuel economy of the 2-cycle engines, and of course, it eliminates the need to calculate the gas and oil mixture ratios of 2-cycle engines. This engine is equipped with the ever popular low oil shutoff. Our HP 100 pump is manufactured with the same quality and features found on our larger pumps. One unique feature of this pump is that it has been equipped with a second discharge port on the side of the pump, sometimes called a "flusher port." This port supplies water pressure to run a flusher nozzle for serious dredging. Because we take the small dredges just as seriously as the larger ones, we want the small dredge to be able to clean out the same cracks and crevices that would otherwise be passed over. The Proline is currently the only 2" dredge with this feature. The recovery system has been completely redesigned as well. Due to recent changes in the pump and jetting system on this dredge, the suction power has dramatically increased. More powerful suction means that the water and dredged materials pass through the dredge with greater velocity than before, therefore the wave classifier and riffle profile had to be adjusted as well. The increase in water velocity, believe it or not, actually improved gold recovery. This dredge uses Hungarian riffles, which are designed to develop a strong vortex or "eddy" when subjected to higher water speed. This dredge builds a stronger vortex behind the riffles to hold the values better, plus it doesn't have the tendency to load up on low grade material that other dredges have, leaving the riffles unshrouded to do their job more effectively. We still use "Noma" matting in this dredge, but now it is used for the full length of the sluice box. This combined with our unique one-piece classifier and riffle design has resulted in a greatly simplified sluice box and easier cleanups. As before, the pontoons are actually used as part of the frame, eliminating the need for a heavier conventional frame. A knockout rod is supplied for cleaning rock jams that occur at the power jet, and it actually stays on the dredge when not in use. It is always there when you need it. Through these recent improvements we were able to shed a few pounds, while actually making the dredge stronger. If you are planning on purchasing a small dredge, we suggest that you compare our features and quality with every other dredge on the market. We strongly feel that no other 2" dredge compares.  

ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf.  Just a few years ago, all 2.5" dredges were floated on innertubes. Most of them were available only with a suction nozzle to provide the vacuum and none of the 2.5’s were capable of driving an air compressor.   This all changed with the introduction of the Proline 2.5" flair dredge. This was one of the first 2.5" dredges which was mounted on sturdy polyethylene pontoons, rather than the puncture-prone innertubes. This was the first dredge of its size which used a flair and it came standard with a power jet, which was much more powerful and easier to operate than the suction nozzles. In addition to being one of the most powerful pumps of its size on the market, our HP 200 was designed to be capable of driving an air compressor to support more active underwater mining. These features made for a very stable, powerful, and usable machine. This dredge has been redesigned to create a lighter and sleeker dredge without sacrificing strength. The dredge frame has been eliminated for weight savings and has been replaced by a front and rear assembly which mounts directly to the pontoons in a similar fashion to our 2" dredge. The pontoons are all new and are capable of handling swifter water if necessary. They are molded to be slightly thicker and incorporate larger inserts than the previous pontoons for increased strength. The dredge can now be powered by two completely different engine/pump combinations. The first option is for the unit to be powered by a 4 horse power Honda engine and our HP 200 pump. This combination makes for a very powerful small dredge, and can still be equipped with an air compressor if you wish. The second option is to power the unit with the 2.5 horse power Honda engine and our HP 100 pump. This is the same engine and pump used on the Proline 2" equipment and develops fairly good power on the 2.5" dredge. It is considerably smaller and lighter, and requires less fuel to operate, which makes it ideal for those looking for a little more than a 2" dredge. It is a somewhat limited package in that it cannot run an air compressor. In addition, it will not be able to process as much material or operate at the same depths as the original package. The sluice box still has rolled edges like the larger dredges, and is designed for maximum fine gold recovery as well as easy clean up. Just like our 2", this machine is supplied with a knock out rod for clearing rock jams. Detailed operating instructions are provided.

ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf.  Just a few years ago, all 2.5" dredges were floated on innertubes. Most of them were available only with a suction nozzle to provide the vacuum and none of the 2.5’s were capable of driving an air compressor.   This all changed with the introduction of the Proline 2.5" flair dredge. This was one of the first 2.5" dredges which was mounted on sturdy polyethylene pontoons, rather than the puncture-prone innertubes. This was the first dredge of its size which used a flair and it came standard with a power jet, which was much more powerful and easier to operate than the suction nozzles. In addition to being one of the most powerful pumps of its size on the market, our HP 200 was designed to be capable of driving an air compressor to support more active underwater mining. These features made for a very stable, powerful, and usable machine. This dredge has been redesigned to create a lighter and sleeker dredge without sacrificing strength. The dredge frame has been eliminated for weight savings and has been replaced by a front and rear assembly which mounts directly to the pontoons in a similar fashion to our 2" dredge. The pontoons are all new and are capable of handling swifter water if necessary. They are molded to be slightly thicker and incorporate larger inserts than the previous pontoons for increased strength. The dredge can now be powered by two completely different engine/pump combinations. The first option is for the unit to be powered by a 4 horse power Honda engine and our HP 200 pump. This combination makes for a very powerful small dredge, and can still be equipped with an air compressor if you wish. The second option is to power the unit with the 2.5 horse power Honda engine and our HP 100 pump. This is the same engine and pump used on the Proline 2" equipment and develops fairly good power on the 2.5" dredge. It is considerably smaller and lighter, and requires less fuel to operate, which makes it ideal for those looking for a little more than a 2" dredge. It is a somewhat limited package in that it cannot run an air compressor. In addition, it will not be able to process as much material or operate at the same depths as the original package. The sluice box still has rolled edges like the larger dredges, and is designed for maximum fine gold recovery as well as easy clean up. Just like our 2", this machine is supplied with a knock out rod for clearing rock jams. Detailed operating instructions are provided.

ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf.  Before the Proline 2.5" dredge was created, the 3" dredge was the smallest machine available that could be equipped with an air compressor for  diving. Most 3" dredges are very close in size to the 4" dredges, and most all are powered by the same engine/pump combination. Not all 3" dredges are created equal. When we designed the Proline 3" flair dredge, we built a machine that we feel addresses most of the problems associated with the 3" size. Our 3" dredge is considerably smaller in size than our 4". It floats on its own set of pontoons which are well matched for the weight and size of this dredge. Like our larger dredges, the frame bolts together and is made lighter for weight savings. The smaller flotation and frame allow this dredge to be considerably narrower, shorter, and lighter than the 4". This dredge is powered by a 5.5 horse power Honda engine and our HP 300 pump, which is the only pump on the market made specifically for the 3" equipment. Our 3" is the smallest dredge we manufacture which utilizes our exclusive “sure flow” coupler. This tried and true system has essentially eliminated all surface rock jams. Conventional dredges develop their vacuum with a power jet made of steel tubing. This tube creates a restriction inside the hose and is responsible for most of the plug ups encountered when dredging. Proline 3" and larger dredges will not plug at the jet because the jet is internally larger than the hose. Another advantage of using the "sure flow" coupler is that it stays on the end of the hose and acts like a quick connector, making it easier to put the dredge hose on and off. The jet and flair are all one piece. It is made of thick polyethylene plastic and will usually outlast the heavier steel power jets by 400%. The sluice box is constructed of aircraft quality aluminum and is fully welded for maximum strength. Like all of our other powered products, the 3" uses "Nomad" matting for the full length of the sluice box. This dredge has a very similar “wave classifier” and riffle design to our 4", but has been fine tuned for the water flow and smaller gravel handling capacity of the 3". The fine gold recovery of this unit is unmatched. If you are considering purchasing a 3" dredge, we urge you to compare the features of our machine with any other dredge on the market. There is simply no other 3" dredge that will perform with it. We guarantee it!

ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf.  Before the Proline 2.5" dredge was created, the 3" dredge was the smallest machine available that could be equipped with an air compressor for  diving. Most 3" dredges are very close in size to the 4" dredges, and most all are powered by the same engine/pump combination. Not all 3" dredges are created equal. When we designed the Proline 3" flair dredge, we built a machine that we feel addresses most of the problems associated with the 3" size. Our 3" dredge is considerably smaller in size than our 4". It floats on its own set of pontoons which are well matched for the weight and size of this dredge. Like our larger dredges, the frame bolts together and is made lighter for weight savings. The smaller flotation and frame allow this dredge to be considerably narrower, shorter, and lighter than the 4". This dredge is powered by a 5.5 horse power Honda engine and our HP 300 pump, which is the only pump on the market made specifically for the 3" equipment. Our 3" is the smallest dredge we manufacture which utilizes our exclusive “sure flow” coupler. This tried and true system has essentially eliminated all surface rock jams. Conventional dredges develop their vacuum with a power jet made of steel tubing. This tube creates a restriction inside the hose and is responsible for most of the plug ups encountered when dredging. Proline 3" and larger dredges will not plug at the jet because the jet is internally larger than the hose. Another advantage of using the "sure flow" coupler is that it stays on the end of the hose and acts like a quick connector, making it easier to put the dredge hose on and off. The jet and flair are all one piece. It is made of thick polyethylene plastic and will usually outlast the heavier steel power jets by 400%. The sluice box is constructed of aircraft quality aluminum and is fully welded for maximum strength. Like all of our other powered products, the 3" uses "Nomad" matting for the full length of the sluice box. This dredge has a very similar “wave classifier” and riffle design to our 4", but has been fine tuned for the water flow and smaller gravel handling capacity of the 3". The fine gold recovery of this unit is unmatched. If you are considering purchasing a 3" dredge, we urge you to compare the features of our machine with any other dredge on the market. There is simply no other 3" dredge that will perform with it. We guarantee it!

ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf.  For decades the 4" dredge has been the overwhelming choice of dredgers. The light weight, portability, and affordability of the 4" has always made it appealing, both to the weekend prospector and the serious dredger alike. Small enough to be slid onto the back of a pickup, light enough to be packed into remote areas, the 4" dredge makes an excellent one man dredge. Ask most of the experienced dredgers, and you'll probably hear that it is the smallest dredge really capable of putting in a full day of serious dredging. The popularity of this dredge makes it a very competitive market for dredge builders, and we have worked very hard to ensure that the Proline 4" dredge stays ahead of the pack. Extensive testing over the last two years has resulted in a more refined and efficient machine. This dredge has been equipped with a new pontoon design which has increased stability and weight capacity, while remaining compact and lightweight. The dredge frame remains the same as the previous model. It's a sturdy, bolt-together design which allows the dredge to be disassembled into smaller components for ease of transport into remote locations. Assembling the dredge requires only a few hand tools. The dredge can be equipped with either the Honda 5.5 horse power engine and HP 350 pump (shown) or the new 6.5 horse power engine and our hot new HP 400 pump for additional power. The new HP 400 is an extremely efficient 3" x 2" pump with a high flow, "progressive bite" five vane impeller. This is the only pump in the industry designed specifically for the 4" size dredge. We highly recommend this engine and pump combination for anyone who dredges to greater depths or at higher altitudes. Of course, this model retains our famous "sure-flow coupler" which essentially eliminates all surface rock jams. This unique one-piece jet flair assembly not only eliminates countless hours of down time unplugging jams, but is approximately half the weight of our competitors designs, and the thick polyethylene plastic jet usually outlasts conventional steel powerjets by four to five times! We've also kept the highly acclaimed "wave classifier" which has proven to greatly enhance fine gold recovery, while eliminating the problems associated with processing low grade black sands. The "wave classifier" develops a pulsing or jigging action which prevents the dredged materials from loading up in the front portion of the sluice box. By shedding the low grade particles, the fine gold can drop out of suspension earlier and accumulate under the classifier, where it is safe from the turbulence and disturbance caused by the larger rocks traveling through the sluice. The rear portion of the sluice box utilizes "Hungarian" riffles for maximum efficiency and the dredge is equipped with "Nomad" matting for the ultimate in fine gold recovery. With these latest advancements, we're confident our 4" dredge will continue to be "the most popular dredge on the market!"

ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf.  For decades the 4" dredge has been the overwhelming choice of dredgers. The light weight, portability, and affordability of the 4" has always made it appealing, both to the weekend prospector and the serious dredger alike. Small enough to be slid onto the back of a pickup, light enough to be packed into remote areas, the 4" dredge makes an excellent one man dredge. Ask most of the experienced dredgers, and you'll probably hear that it is the smallest dredge really capable of putting in a full day of serious dredging. The popularity of this dredge makes it a very competitive market for dredge builders, and we have worked very hard to ensure that the Proline 4" dredge stays ahead of the pack. Extensive testing over the last two years has resulted in a more refined and efficient machine. This dredge has been equipped with a new pontoon design which has increased stability and weight capacity, while remaining compact and lightweight. The dredge frame remains the same as the previous model. It's a sturdy, bolt-together design which allows the dredge to be disassembled into smaller components for ease of transport into remote locations. Assembling the dredge requires only a few hand tools. The dredge can be equipped with either the Honda 5.5 horse power engine and HP 350 pump (shown) or the new 6.5 horse power engine and our hot new HP 400 pump for additional power. The new HP 400 is an extremely efficient 3" x 2" pump with a high flow, "progressive bite" five vane impeller. This is the only pump in the industry designed specifically for the 4" size dredge. We highly recommend this engine and pump combination for anyone who dredges to greater depths or at higher altitudes. Of course, this model retains our famous "sure-flow coupler" which essentially eliminates all surface rock jams. This unique one-piece jet flair assembly not only eliminates countless hours of down time unplugging jams, but is approximately half the weight of our competitors designs, and the thick polyethylene plastic jet usually outlasts conventional steel powerjets by four to five times! We've also kept the highly acclaimed "wave classifier" which has proven to greatly enhance fine gold recovery, while eliminating the problems associated with processing low grade black sands. The "wave classifier" develops a pulsing or jigging action which prevents the dredged materials from loading up in the front portion of the sluice box. By shedding the low grade particles, the fine gold can drop out of suspension earlier and accumulate under the classifier, where it is safe from the turbulence and disturbance caused by the larger rocks traveling through the sluice. The rear portion of the sluice box utilizes "Hungarian" riffles for maximum efficiency and the dredge is equipped with "Nomad" matting for the ultimate in fine gold recovery. With these latest advancements, we're confident our 4" dredge will continue to be "the most popular dredge on the market!"

ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf.  The 5" has always been popular with dredgers who were looking for the perfect balance of portability with higher productivity. Smaller dredges simply can't process as much gravel and the larger dredges require more effort to get into those more remote areas where the richer gold deposits usually are. This is why the 5" dredge size is normally the smallest dredge chosen by the serious prospectors and professional dredgers. For many, the decision is not which size of dredge to buy, but whether to opt for the single engine or twin engine design. Proline has added a new single engine dredge design to offer a choice to our well established twin engine platform. The single engine dredge is lighter and lower in cost than the twin engine model, and is directed more toward the enthusiast who may not have the need for the additional power and portability of the twin. The single is powered by your choice of an 8 horse power or 9 horse power Honda engine, and our HP 500 pump. This engine/pump combination provides for excellent suction power and can offer better fuel consumption over a twin engine dredge that is being operated at full throttle. The twin engine model is aimed toward the more serious dredger and offers the most suction power of any 5" dredge in its class. Powered by two 5.5 horse power Honda engines, and our proven HP 350 pumps, the latest option on the twin engine model is to equip it with dual 6.5 horse power Honda engines and our new HP 400 pumps for even greater power, making it ideal for higher altitudes or extra deep dredging. This dredge is easier to refuel and start due to the location of the pumps, and the two smaller, lighter power plants are easier to handle than the larger single engine. The twin engine model is also capable of driving an additional air compressor, should the need arise. Both dredges use the same modular flotation and sturdy frame which bolts together for ease of transporting and storage when not in use. Naturally, these dredges use the same non-clogging jetting system found on our other machines. Of course, gold recovery is the prime factor in determining the worth of any dredge. Proline takes pride in building equipment that delivers consistent recovery of the finest gold. NO machine can possibly keep all of the gold, but our designs have proven that they are capable of recovering finer gold than many of our competitors. Both of the 5" dredges offer excellent recovery. If you are looking to purchase a high quality 5" dredge, you now have a choice, the Proline single or the Proline twin.

ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf.  The 5" has always been popular with dredgers who were looking for the perfect balance of portability with higher productivity. Smaller dredges simply can't process as much gravel and the larger dredges require more effort to get into those more remote areas where the richer gold deposits usually are. This is why the 5" dredge size is normally the smallest dredge chosen by the serious prospectors and professional dredgers. For many, the decision is not which size of dredge to buy, but whether to opt for the single engine or twin engine design. Proline has added a new single engine dredge design to offer a choice to our well established twin engine platform. The single engine dredge is lighter and lower in cost than the twin engine model, and is directed more toward the enthusiast who may not have the need for the additional power and portability of the twin. The single is powered by your choice of an 8 horse power or 9 horse power Honda engine, and our HP 500 pump. This engine/pump combination provides for excellent suction power and can offer better fuel consumption over a twin engine dredge that is being operated at full throttle. The twin engine model is aimed toward the more serious dredger and offers the most suction power of any 5" dredge in its class. Powered by two 5.5 horse power Honda engines, and our proven HP 350 pumps, the latest option on the twin engine model is to equip it with dual 6.5 horse power Honda engines and our new HP 400 pumps for even greater power, making it ideal for higher altitudes or extra deep dredging. This dredge is easier to refuel and start due to the location of the pumps, and the two smaller, lighter power plants are easier to handle than the larger single engine. The twin engine model is also capable of driving an additional air compressor, should the need arise. Both dredges use the same modular flotation and sturdy frame which bolts together for ease of transporting and storage when not in use. Naturally, these dredges use the same non-clogging jetting system found on our other machines. Of course, gold recovery is the prime factor in determining the worth of any dredge. Proline takes pride in building equipment that delivers consistent recovery of the finest gold. NO machine can possibly keep all of the gold, but our designs have proven that they are capable of recovering finer gold than many of our competitors. Both of the 5" dredges offer excellent recovery. If you are looking to purchase a high quality 5" dredge, you now have a choice, the Proline single or the Proline twin.

ACHTUNG: Lieferzeit ca. 10 bis 12 Wochen. Bitte beachten Sie die Lieferzeiten für diesen Artikel. Für Fragen zum Gerät, zur Kaufabwicklung Transportkosten und zur Lieferzeit, nehmen Sie bitte mit uns Kontakt auf.  The 6" dredge is one of our personal favorites. It is relatively light in weight and can be transported and assembled with little more effort than that required for a 4" or 5" dredge, yet is capable of processing several times more material than those smaller dredges. The 6" dredge is ideally suited for use as an exploration and sampling unit for larger mining projects, but it is also capable of being the primary source of gold recovery in smaller operations. In our opinion, the 6" is the largest dredge that can be effectively operated by one man, however, a two man team would allow the dredge to be used to its fullest potential. The Proline 6" dredge was designed to be strong, powerful, and efficient. It looks very similar to our twin engine 5" dredge, only larger. The pontoons are larger to support the additional weight and performance of this dredge, with thicker plastic to ensure years of service. The framework of this dredge bolts together just like the 5", but has a slightly more robust design. The dredge is powered by your choice of two 8 horse power or two 9 horse power Honda engines and our recently developed HP 500 pump for excellent suction power and minimum fuel consumption. This unit is capable of operating at considerable depths. It is available with either one or two higher pressure diving air compressors for deep diving, or it can be equipped with either one or two of the low pressure diving compressors used on the smaller dredges. This is also the only 6" dredge on the market which is supplied with 25 feet of dredge hose as a standard length. Longer hose can be supplied if needed. This unit is capable of being operated in rugged conditions, and can handle moderately swift water if anchored properly. The engines can be mounted on the dredge frame in several locations to compensate for varying dredging and water conditions. For instance, if the dredge is being initially set up in a stream bed with very little water running over the gravels, the dredge hose may be supported on the river bottom. After the dredge has been in operation for some time, the dredging hose will eventually be unsupported and the weight of the hose and the dredged material can make the machine front heavy. Moving the engines rearward can greatly help to maintain stability. This dredge offers excellent gold recovery, just like our other products and cleanup is quick and easy for a minimum of down time. In the short time that this dredge has been on the market, it has already earned a solid reputation for performance and dependability. These machines are currently being operated in North America, South America, and in some of the Pacific Rim of Fire countries with great results.